Product Categories
Power Transformers Special Transformers
Box-Substations
Switchgear Reactors
Profile and equipment 
Auto-style resistance furnace transformer
It is used as the power of conditioning resistance furnace and applies the auto-structure for the more economical and reasonable design. It is suitable for the exchange lines of the rated frequency are 50HZ as a resistance furnace to adjust the voltage.
- functional
- use condition
- applied range
- picture
- certification
- 1. Core: selection of 0.3mm thick of high performance of magnetic silicon steel sheet, 45° wide ramp joints, three-step lap, no punching, the surface is coated with epoxy resin, and therefore rust-proof, low loss and low noise. The core applies the multi-stepped circular and core conjugate a rectangular section with steel and screw fastening.
2. Coil: The inner coil is the cylinder structure, and the external is always the spiral structure, and the inter-turn is separated by insulating pad, and then it through the impregnation of the H-class solvent-free varnish and the high temperature baking and therefore can bear the thermal shock and no cracking, it can also be recovered after decomposition and environment protection.
3. Shell: there are transformer shields and there exists the lifting rings for the lifting of the whole body.
- Altitude: ≤1000m
Environment temperature: -10℃～45℃
The average relative humidity: 95%
Installations: indoor
- No related information ...
- No related information ...
- No related information ...
