Product Categories
Power Transformers Special Transformers
Box-Substations
Switchgear Reactors
Profile and equipment 
Hydrogen furnace transformer
Hydrogen furnace transformer belongs to the furnace transformer (it also belongs to the rectifier transformer to a certain meaning), it mainly as the power use of the hydride reduction furnace during the process of smelting. It is a three individual three-phase input and the three respectively output.
- functional
- use condition
- applied range
- picture
- certification
- 1. Core:
selection of 0.3mm thick of high performance of magnetic silicon steel sheet, 45° wide ramp joints, three-step lap, no punching, the surface is coated with epoxy resin, and therefore rust-proof, low loss and low noise.
2. Coil:
High-voltage coil: it applies the continuous structure of high mechanical and good cooling, and then through the impregnation of the H-class solvent-free varnish and the high temperature baking and therefore can bear the thermal shock and no cracking, it can also be recovered after decomposition and environment protection.
Low voltage coil: it applies the foil structure with the NOMEX as the layer insulation material and therefore has strong ability of short-circuit resistance and high mechanical property. The winding has been through two times of vacuum impregnation and therefore has strong ability of four protections, that is, anti-moisture anti-fungal, anti-salt spray and anti-weak acid.
- Altitude: ≤ 1000m
Environment temperature:
The max: +40℃
The average max: +30℃
The highest annual average max: +20℃
The lowest annual average min:-30℃
Installation: the places where is ventilate and clean
- ...
- ...
- ...
